If you are the kind that prefers non-invasive cosmetic skin treatments, then you should consider going for microdermabrasion. Actually, you should start by observing the microdermabrasion before and after treatment photos of those who have tried the procedure. They will encourage you to start the treatment.
Generally, the procedure involves scrubbing off the outer layer of the skin. Specifically, the microdermabrasion machines use a fine diamond or crystals to “sands away” the dead skin cells.
Though the process is painless and has minimal side effects, you need to prepare well before you start the procedure. With proper preparation, your skin treatment will produce satisfying results.
So what are you supposed to do before you start using a microdermabrasion tool for skin treatment? Please read on and learn.
Preparation before Microdermabrasion
Before you can start treatment, there are a few preparations you should make. This will help you to achieve your desired result without any health hiccups. Therefore, here are some essential considerations you should make.
✱ Learn and Understand the Procedure
Actually, when one mentions scrubbing of the skin, you may dread the procedure. So, the best way to clear your mind of doubts and fear is learning about the process.
To have a comfortable learning time, consult your doctor. They should be able to answer any question that you may have.
Again, you can use the search engines as well. They may be a faster way of getting information without having to move around. Once you have gathered the information, you may choose a clinic or a salon that offers microdermabrasion at your budget. Also, you may opt to do the procedure at home.
If you decide to treat your skin at home, you will need to look for the best microdermabrasion home kit UK. Coupled with a few skills, this will help you to realise pro-like results.
✱ Confirm that Your Skin is Fit for Microdermabrasion
Even though microdermabrasion is safe for almost all skin types, there is a limitation. In case you have an active skin outbreak, you need first to seek treatment of the condition. Some of these conditions include:
- Open sores
- Active acne
- Delicate capillaries
Microdermabrasion with these conditions would lead to the spread of infections from one place to another. Also, your skin should have been free of chemical peels and other exfoliation procedures for at least a week.
You need to seek a doctor’s advice to verify if your skin is ready for the procedure. If not, first treat the hindering condition then come for microdermabrasion later.
✱ Understand What to Expect During the Procedure
Before you commit start microdermabrasion, you need to know what the procedure feels like. Though the process is non-invasive and painless, it may feel a bit uncomfortable.
Actually, the sensitivity will vary from one person to another.
Again, since the process is minimally invasive, there should be no bleeding. This also means that the skin requires no healing downtime. You should be able to go to work as usual. All the same, you should not fear. The process is among the safest cosmetic treatments available.
✱ Just Before a Microdermabrasion Session
Once you have gone through the above steps, you are ready for a microdermabrasion session. But wait for a moment. Before you place the device on your skin, the surface needs to be sterile. Also, you should make sure that your face is free of makeups and other skin products.
Therefore, you should use a gentle cleanser to clean up the face instead of using soaps. You may consider using stearyl alcohol, sodium laurel or other gentle cleaners.
Skincare After a microdermabrasion Session
After treatment, you will immediately notice one microdermabrasion result if not several. One of the instant results is a brighter surface left after the removal of dead skin cell.
Since the resulting surface is more sensitive than the former, you need to take extra care. Therefore, here are ways to care for your new skin.
★ Keep the Skin Cool and Moisturised
The first 24 hours after treatment are crucial for the realisation of the best results. After treatment, the skin will feel a bit irritated. You will realise the surface will feel tight and swollen. Depending on the intensity of the procedure, the skin may also feel bruised.
Again, the procedure may also lead to drying up of the skin. Therefore, you need to cool the surface down and keep it moist. To do this, you should need to apply a good moisturiser.
Also, the skin will be sensitive to heat. So keep away from hot showers or sauna. On the same note, the skin will be sensitive to direct sunlight. Therefore, you will need to wear your preferred sunscreen as you move outdoors.
This is to say you will need to carry your moisturiser and sunscreen in your handbag. Just in case your skin needs a retouch while you are away from home.
★ Continue With a Moderate Skin Care Routine
After a treatment session, you will have a surface that has new and sensitive cells. These cells can’t withstand products with high or low PH. Therefore, you need to use mild products that will not cause any irritation to the skin.
Some machines come with serums that you should use after treatment. If your device didn’t come with any product, you need to buy some that are gentle.
Avoid using makeups for at least 24 hours. Also, keep away all foundations, even those that contain moisturisers. These products may cause unnecessary skin irritation and delay your desired results.
★ Avoid Picking at Your Skin
Experiencing some skin peeling is normal after microdermabrasion. The removal of the dead layer of skin leads to rapid skin turnover. As a result, you may experience some flaking on the surface.
In such a case, you need to avoid peeling or picking on your skin. This may damage the new surface and cause wounds.
Microdermabrasion Treatment Results
After looking at microdermabrasion before and after practices, it’s time to look at the results from the procedure. A quick search on Google shows that many people are considering microdermabrasion as a remedy to several skin issues. Some of them include acne scars, fine lines, wrinkles, and stretch marks.
Notably, it is evident that the procedure works better for some conditions than others. Therefore, microdermabrasion before and after photos are the only sure way to tell which conditions respond best to the treatment.
So, let’s look at some of the results.
❖ Microdermabrasion Results on Acne Scars Treatment
Since microdermabrasion works on the upper layer of the skin, it works very well for the treatment of mild acne scars. These scars are usually on the epidermis and easy to work on. After several treatments, the acne scars located on the outer skin layer diminish and fade away.
For deeper acne scars, the process may not be as effective. These scars will require a more invasive treatment method. So do not use microdermabrasion acne treatment for deeper scars. It may worsen the situation. Therefore, seek medical help for the acne breakouts before using abrasion for the treatment of scars.
❖ Treatment Result on Stretch Marks
Stretch marks are as a result of the skin losing its elasticity. As microdermabrasion removes the outer layer of the skin, it also enhances the production of elastin and collagen. These are important proteins in the maintenance of a youthful and elastic skin.
Specifically, elastin is the protein responsible for maintaining an elastic skin. Therefore, the process helps to eliminate stretch marks after weight loss or after pregnancy naturally. Your skin regains its firmness and elasticity after a few sessions.
❖ Reduction of Wrinkles and Age spots
Though microdermabrasion may not finish wrinkles and age spots, repeat treatments do a great job in reducing them. Therefore, you can use microdermabrasion to reduce the intensity of wrinkles, fine lines, and age spots.
Like we had mentioned earlier, the procedure may not be effective for deep wrinkle or spots. But for any line or spot that is shallow, an abrasion treatment can significantly reduce them.
From the numerous cosmetic skin treatment methods available today, microdermabrasion is one of the safest. It is non-invasive and requires no downtime. Fortunately, if you like doing things for yourself, you can buy one of the recommended tools and enjoy the at-home microdermabrasion treatment.
Results from the treatment may not be instant. It may take 4 to 6 sessions for you to realise the expected outcome. Therefore, taking microdermabrasion before and after pictures of yourself could be a great way to record your progress.
Remember, how you take care of your skin in the first 24 hours after treatment is of great importance. You need to practice gentle caution when using skincare products. Only use gentle products that will keep the skin moisturised without causing irritations.
Finally, in case you realise any skin outbreak after the first treatment, discontinue the sessions. You should first seek assistance from an expert to make sure your skin is fit for microdermabrasion.